3D Web Studio + SketchUp Plugin • P. Recovery • Nesting CNC • Marketplace

3D design, SketchUp plugin,CNC Machining, Workshop Safety & Marketplace Salesin 5 minutes.

Much more than just drawing software :CW Fit-Outconnects your3D Web Studioand yourSketchUp plugindirectly to your saw/CNC (0 loss nesting, DXF, G-Code, QR labels), protects your design office against loss of work (P.Recovery) and waste of workshop time (Twin Live), and allows you tosell your creations on the Cuisines 3D Marketplace.

P.Recovery :Double Web/SketchUp backup & Anti-crush padlock
Safety Time Workshop :Real-time lens on the designer's SketchUp activity
SketchUp Bidirectional Plugin :1-click Sync to Layout & G-Code
3D Kitchens Marketplace :Showcase and sell your encrypted models online
CW
SECURE WORKSTATION
License Protection & Offline Mode
PWA+SKP
1. Install the Civil Works Application
Required to unlock 3D Studio and CNC exports.
2. End of Nesting Calculation Alerts
Receive the direct link as soon as your panels are laid out.
VIRTUAL VISIT BEFORE REGISTRATION • 100% REAL

Visit CW Fit-Out in Action: Manipulate our 3D Projects & Download their Real Machining Exports

Click on one of the 4 typical cases below to rotate the model in real time 3D, inspect its layout (export fitout config) and download its PDF, DXF and G-Code files in your language.

Export Language :
Cuisine Architecturale en L avec Îlot Cascade Marbre & Gola GENERAL CASE #1 • L-SHAPED KITCHEN & CASCADE ISLAND 3D + Actual Exports
Architectural L-shaped Kitchen with Marble & Gola Waterfall Island

Évier américain timbre d’office (tiroir en U), colonne four/micro-ondes, profils Gola L/C et retombées cascades à 45°.

7 plaques 2800×2070 mm (Chute nette : 4.2%)
184 drilling A/B/C • Machining time: 26 min
Cuisine en U Grand Volume avec Sur-Meubles N2 & Vitrines Alu GENERAL CASE #2 • U-SHAPED KITCHEN ON 2 LEVELS 3D + Actual Exports
Large Volume U-shaped Kitchen with N2 Over-Units & Aluminum Showcases

Double row of wall units up to the ceiling (2800 mm), smoked glazed aluminum frames and CNC LED strip grooves.

11 plaques 2800×2070 mm (Chute nette : 3.8%)
276 drillings A/B/C • LED grooves 16×8 mm
Adaptation Chirurgicale : Pilier Béton, Gaine Technique & Dos Avancé SPECIAL CASE • SITE OBSTACLES & CONCRETE POST 3D + Actual Exports
Surgical Adaptation: Concrete Abutment, Technical Sheath & Advanced Back

Demonstration of a complex real case with parametric advancement of the back, cutting of the work surface and Ø68mm hole saw reservation.

6 plaques 2800×2070 mm (0 erreur sur chantier)
Back advanced 120 mm • Holes taken Ø68 mm
Dressing Architectural Vitré avec Double Perçage Recto-Verso (Face A/B) CUSTOMIZED • MULTI-COLUMN DRESSING STUDIO 3D + Actual Exports
Architectural Glazed Dressing Room with Double-Sided Double Drilling (Face A/B)

Column-by-column configuration: English-style drawers with offset hinges, illuminated wardrobes and CNC program Face B.

9 plates 2800×2070 mm (Double drilling L+D)
CNC Program Side A + Mirror Flip Side B
Convinced by the precision of 3D and machining files ?
Register for free in 30 seconds and generate your3 first complete projects(3D Quote, Nesting Layout, DXF & G-Code) valid for 7 days.
Create my Account & Test Now
An Unparalleled Industrial Ecosystem

9 Exclusive Technologies that secure your design office, your workshop and your sales

SKETCHUP GATEWAY .RBZ
1. SketchUp Bidirectional Plugin

Draw inSketchUpor in our3D Web Studio et synchronisez en 1 clic : vos géométries 3D sont instantanément converties en fiches de débit, plans de calepinage Nesting, contrats CAO et programmes G-Code CNC. (Functional under the Full Suite PRO Pack, with free trial of 3 projects for 7 days).

ZERO LOSS OF EFFORT GUARANTEE
2. P. Recovery

Never waste another design hour again :P.Recoverymaintains separate cover points between your web edits (Design Assist) and your SketchUp synchronizations, accompanied by aCloud Padlockwhich prevents any designer from overwriting a validated project by mistake.

ANTI-WASTE WORKSHOP TIME
3. Weather Safety Workshop (Lunette Live)

Truebezel placed on SketchUp and Studio 3D, the monitorTwin Live permet au dirigeant de visualiser en direct l'écran de travail de son designer et d'être alerté s'il bascule sur un fichier externe : protégez votre bureau d'études contre l'épuisement de vos ressources sur des projets personnels non facturés.

MONETIZATION & HOT LEADS
4. Sell ​​your Creations on the Marketplace

Make each drawing profitable: publish your best 3D creations in 1 click onShopping 3D Kitchens avec votre prix de vente. Les particuliers explorent votre modèle en 3D interactif et réservent directement un rendez-vous qualifié avec votre atelier ou showroom.

5. 3D Studio & Brand Catalogs

Caissons bas/hauts, angles en L/45°, îlots cascades, Studio Dressing multi-colonnes, éviers américains (tablette siphon 260×280, tiroir en U). Intègre les grands catalogues de panneaux (Egger, Kronospan, Alvic, Swiss Krono, AGT, Cleaf, Polyrey, Pfleiderer, Greenlam, Propann, Comachem...).

6. Technical Sheet 360° & Exploded cabinet

Inspection individuelle de chaque caisson en 3D interactif (mode Rayons-X, ouverture des portes/tiroirs, éclatement 0-100%), vues cotées 1/10 et carnet d'usinage face par face synchronisé au dixième de millimètre avec le Nesting (Matrice A/B/C ±32mm, rails tiroirs, charnières).

7. Nesting Solver “0 Loss” & Falls

Chiffrage temps réel en 3D, débit net synchronisé, puis réinjection automatique des chutes post-Nesting au prorata sur chaque caisson. Consommation prioritaire de votre stock de chutes (avec recherche par fournisseur/modèle et zoom texture HD).

8. G-Code Multi-CNC, DXF & QR Codes

Dedicated Syntec/Mach3 post-processors (.n.c.), RichAuto DSP/NcStudio (.tap), Biesse/Homag (.iso) avec profondeurs Z différenciées (A: Taquets/Rails, B: Vis débouchante ou Minifix, C: Tourillons) et Programme Face B (Double perçage G+D). Étiquettes A4/Zebra avec QR Code 3D.

9. 360° HR Audit & 24h SLA Dispatcher

Pointage chronométré continu du temps de montage réel par caisson en atelier, recalibrage en 1 clic de vos taux horaires (Humain, Machine CNC, Sous-traitance) et commande de vos panneaux/quincailleries au meilleur prix via le Dispatcher Fournisseurs.

INTEGRATED END-TO-END FLOW

A unique ecosystem: from 3D Design / SketchUp to HR Audit and Marketplace Sales

Chaque décision prise dans le Studio 3D ou dans SketchUp met instantanément à jour le débit, les perçages CNC, la rentabilité réelle de l'atelier et vos commandes fournisseurs :

3D Design, SketchUp Plugin & P. ​​Recovery :L/U-shaped kitchens, oven/coffee maker columns, American sink (U-shaped drawer), waterfall island, Studio Dressing and double-channel backup without loss.
0 Loss Nesting, 360° Sheet & G-Code : Déduction axiale des chants/Gola, consommation prioritaire des chutes en stock, réinjection financière des chutes et G-Code multi-machines (Face A + Face B G+D).
Lunette Temps Atelier, ERP & Audit 360° :Live supervision of the use of SketchUp, continuous timing of HR assembly by cabinet and automatic recalibration of your hourly rates.
Sales Marketplace & Dispatcher SLA 24h :Sell ​​your 3D creations to individual customers and order your panels/appliances via the Dispatcher from KYC verified sellers.
1. 3D STUDIO + SKETCHUP PLUGIN + P. RECOVERY 4 850 DT HT ✓ P. Recovery (PWA/SKP) • ✓ SketchUp Plugin • ✓ B2B Bridge 2. NESTING “0 LOSS”, 360° SHEET & CNC G-CODE DXF + G-CODE P046 C4-427 Left side panel P043 🔪260×280 C4 Sink Shelf P065 • Drawer Bottom U ♻️ STOCK FALL (0.85m²) ; SYNTEC / BIESSE G21 G90 G54 ; T2 DRILLINGS A/B/C G1 Z-8.0 F1200 (A) G1 Z-18.2 F1200(B) G1 Z-12.0 F1200(C) ; T1 SIPHON 260x280 G1 X512 Y72 F4200 ; PROG SIDE B (L+R) M30 ✓ Scraps reinjected into the Quote • ✓ Unique QR labels P001..P065 3. LIVE BINOCULAR GLASSES, 360° AUDIT & HR COSTS 🔴 JINELLE LIVE SKETCHUP Anti-Labor Staff Workshop WORKSHOP ASSEMBLY POINT (C4) : ⏱ 00h 34m 18s ⏸ Break Counter-Audit: Planned 40m vs Actual 34m ✓ Team Performance: 114% (+6 mins gained) ✓ Actual Net Margin: 1,420 TD (31.8%) ⚡ Recalibrate Workshop Hourly Rate ✓ Live SketchUp supervision & HR time control 4. MARKETPLACE 3D SALE & DISPATCHER SLA 24H 📦 ORDER #CW-427: 7 EGGER/PROPANN Plates + 14 Hinges + Sink 💰 Civilis Agreement Price: -8% below the pro counter price • SLA: 23h 14m #1 KYC Certified Stockist Seller (6 km from the site) ★ Reliability: 98% • Stock Confirmed • Delivery validated (Total: 100%) ✓ ACCEPTED #2 Distributeur Régional KYC #2 (Bascule auto si délai > 24h) ★ Reliability: 94% • At 14 km • Active anti-failure protection ✓ Sell ​​your 3D kitchens online • ✓ KYC verified suppliers
Professional & Modular Licenses

Choose the Pack suited to your profession

FREE TRIAL (3 PROJECTS / 7 DAYS) & SKETCHUP PLUGIN INCLUDED IN FULL SUITE PRO PACKAGE
Testez gratuitement jusqu'à 3 projets (durée de vie de 7 jours par projet d'essai). Au-delà de l'essai, le Plugin SketchUp bidirectionnel fonctionne exclusivement sous le Pack 4 (Full Suite PRO).
P. Recovery Included in all Packs
PACK 1 • DESIGN & MARKETPLACE 11st Quarter Promo
Design & Showroom Pack

For designers and architects who design in 3D, sell on the Marketplace and transmit to a workshop.

🔥 1er Start-up quarter :
49 € / 1er trim. excluding tax
Then129 € / trimestre HT
  • 3D Studio Kitchens, Waterfall Islands, Corners & Dressing Rooms
  • P.Recovery (Web PWA)& 3D HD Photo Export
  • Selling your creations on the Cuisines 3D Marketplace& reception of customer appointments
  • B2B Bridge :1-Click transfer of the 3D project to a kitchen workshop
  • Without CNC/Nesting technical exports, nor ERP, nor SketchUp Plugin
Choose Pack 1 (or Trial 3 Projects)
PACK 2 • CNC WORKSHOP Requires Pack 1
Factory Pack, Nesting & G-Code

For kitchen designers and workshops: post-Nesting costing with real offcuts, 360° sheet, layout and CNC G-Code.

690 € / year excluding tax
Industrial complement to Pack 1 (3D Showroom).
  • Technical Sheet 360° cabinet(3D X-rays, views 1/10 & face-by-face drilling book)
  • 4 Stage Nesting Solver « 0 Loss », Intelligent stock of scraps & financial reinjection of scraps
  • Machinery Exports :G-Code Multi-CNC (.nc, .tap, .iso + Face B G+D), Nesting .DXF, Cutplan, .CSV& QR labels
  • Bridge B2B Factory :Receiving Designer projects & Sharing your cabinet library
  • Read-only 3D viewer of projects received via the B2B Bridge (3D Creation/Editing via Pack 1 or Full Suite PRO)
Activate Pack 2 (Complete or Slices)
PACK 3 • ERP MANAGEMENT Requires Packs 1+2
ERP Pack, Live Glass & 360° Audit

To supervise live design screens, time HR assembly and edit your CAD customer contracts.

490 € / year excluding tax
Accessible to holders of Packs 1 + 2 (CNC Workshop).
  • Safety Time Workshop (Jumelle Live) :Live supervision of designer & anti-work screens
  • Cockpit d'Audit Projet 360° :Continuous HR stopwatch by cabinet & Counter-Audit Forecasts vs Actual
  • 1-Click Auto-Calibrationof your hourly rates (Human, CNC Machine & Subcontracting)
  • Customer Contract Generator + CAD Execution Plans& CRM Kanban Pipeline
  • Read-only 3D viewer of workshop projects (3D & CNC creation via Packs 1+2 or Full Suite PRO)
Activate Pack 3 (Complete or Slices)
🇹🇳 SPECIAL CEILING CARD TUNISIA & D17
Votre carte bancaire est limitée à 300 DT ou 500 DT par semaine ?
Activate your Pack immediately by dividing your payment into installments ≤ 300 DT or ≤ 500 DT via Flouci (14 days unlocked from the 1st installment).
Simulate my slices
🇫🇷 French 🇹🇳 العربية 🇬🇧 English 🇪🇸 Spanish 🇵🇹 Portuguese 🇮🇹 Italiano 🇩🇪 Deutsch 🇷🇺 Russian 🇹🇷 Türkçe